Mold Star 30 - 8 oz kit - Recreate 3D Objects

Mold Star 30 - 8 oz kit Create molds with the highest level of detail this two part platinum cure silicone molding compound. Easy to measure for mixing, molds are created by combining equal parts by volume of Part A and Part B and mixing until one even color with no visible streaks is achieved. With a pot life of 45 minutes, you have plenty of time to pour your molds which will be fully cured and ready for use in 6 hours. This high quality molding material is flexible enough to allow greenware clay to be released without breaking, and is heat safe up to 450°F (232°C) so you can dry your greenware in mold directly on a hot plate or in a dehydrator. Beginner friendly, this molding material is relatively low viscosity and vacuum degassing is not required for most general applications. How to Use: Before measuring, pre-mix Part A and Part B in their respective containers to make sure the material has not settled. Dispense the required amounts (equal parts by volume) of Part A and B into a mixing container before mixing thoroughly. Make sure to scrape along the sides and bottom of your container to assure the material is fully incorporated. Mix until the material is one even color…