Mora Knife Blade No. 1/0

The 1/0 blade is high-carbon steel with no lamination, making it thinner than its laminated counterparts and thus better for slicing. The shorter blade length and full-length tang would result in an excellent all-around utility knife, with a thin blade suited even for kitchen work. Below are the detailed measurements of this blade: Overall Length: 6.5 inches (16.5 cm) Blade Length: 3 inches (7.6 cm) Blade Width: 0.6 inches (1.5 cm) Blade Thickness: 0.07 inches (1.8 mm) Blade Weight: 0.8 ounces (23 grams) Tang Length: 3.5 inches (8.9 cm) Tang Thickness: 0.07 inches (1.8 mm) Tang Width (At Blade): 0.91 inches (2.3 cm) Tang Width (At End): 0.11 inches (2.8 mm) Blade Material: high carbon steel Here are the fittings that this blade can be paired with, based on the sizes of the blade, tang, and slot. Any fitting labelled "might be too small/big" will still fit the blade, but might not be a good match depending on the style of knife that you're making. Bolster 13mm x 18mm Brass Shaped : slot is a bit too small, will need to be filed wider/longer Bolster 13mm x 18mm Nickel Shaped : slot is a bit too small, will need to be filed wider/longer Bolster 15mm x 22mm Brass Shaped : might be…