OpenFlexure Microscope Kit

OpenFlexure is an automated digital microscope designed by the OpenFlexure Project . LabCrafter sells a kit containing all the parts to build the low-cost version of the v7 microscope. You can upgrade this version of the kit to a high-resolution version at a later stage using our high-resolution upgrade kit . Kit contents The kit contains all the 3D-printed parts you need to build the low-cost version, as well as the following hardware: Electronic components Sangaboard v5 200mm Pi Camera ribbon cable 28BYJ-48 stepper motors Raspberry Pi Camera Module v2 Illumination kit LED board diffuser board spacer wiring condenser lens Mechanical components M3 nuts, washers, screws and bolts Viton O-rings Assembly tools and consumables 2.5mm ball-end Allen key nut tool, band tool and band tool cover for actuator assembly Lens tool Light oil Available colours LabCrafter can 3D print the microscope in the following filament colours: Black Blue Green Select the colour you prefer from the drop-down box when ordering. If you want a combination of these colours, please contact us at info@labcrafter.co.uk before ordering. 20% of profits are donated to the OpenFlexure Project You'll need a Raspberry…