4-Channel M.2 Adapter for Raspberry Pi 5

Whilst we offer a growing range of SSD HATs for Raspberry Pi 5 , not many of them can accept four NVMe SSDs - and even fewer include a power supply to handle the power requirements! This is Waveshare's 4-Channel M.2 Adapter for Raspberry Pi 5 . It uses the Pi 5's PCIe connection along with an ASMedia ASM1184e packet switch to allow you to use four NVMe devices with a single Raspberry Pi . Each slot can accept 2230, 2242, 2260 or 2280-format NVMe devices , and includes M.2 fixing screws to keep them securely in place. Each M.2 slot has its own indicator LED at the edge of the board. There is also a power LED (controlled by the PCIe power enable signal). A 12V 4A UK power supply (barrel jack) is included , along with a PCIe cable, GPIO powering cable and a set of fixings. Raspberry Pi and NVMe devices not included. This product contains a three-pin UK power supply. Features Compatible with Raspberry Pi 5 only Connects up to four NVMe devices to Raspberry Pi 5 Features four M.2 M-key slots Supports 2230, 2242, 2260 and 2280 M.2 NVMe drives Supports NVMe protocol drives ASMedia ASM1184e packet switch Supports booting Raspberry Pi 5 from NVMe SSD Includes indicator LEDs for each M.2…