RP2350 1.64" AMOLED Touch Display Dev Board

This is an RP2350-based development board from Waveshare , with a compact 1.64" AMOLED touch display along with a bunch of cool features making it a useful option for a range of projects. The RP2350 needs no introduction but we'll do it anyway - it's microcontroller chip designed by Raspberry Pi , with a unique dual-core and dual-architecture design with dual ARM Cortex-M33 or dual Hazard3 RISC-V processor support, a flexible clock running up to 150 MHz and 520KB of SRAM, supported by 16MB onboard flash . The display is a 280x456 1.64" AMOLED panel, offering 16.7m colours , controlled via QSPI. It supports touch input via I2C, so you can use it as a simple interface for your project without the need for buttons or other inputs. The board is powered and programmed via USB-C , alongside a PicoBlade-compatible/MX1.25 connector for a LiPo battery (battery not included, but we stock PicoBlade-compatible LiPo batteries in the store ) . The LiPo battery will be charged when USB-C power is connected, thanks to the onboard charge circuit . You'll also find a microSD card slot for storage, a 6-axis IMU (3-axis gyroscope and a 3-axis accelerometer), and the usual BOOT/RESET buttons and…