Silver screen printing ink for paper

Dipilu Paperstar silver water-based screen printing ink for paper and cardboard Clean edges, matte finish and reliable processing on absorbent surfaces. Color and special features: SILVER - Optimal gloss on white backgrounds. For best results, use coated paper (non-absorbent). This ensures that the paper does not warp after printing with water-based ink. In short Finish: matte Odor: very faint Coverage: medium to high (depending on the fabric) Handling: runs stably, prints sharply, easy to clean Drying: Dries quickly. Application 1) Mixing Dilute to 5–10% by weight with thinner . If necessary, add 5–7% drying retarder (first retarder, then thinner). 2) Sieve selection Recommended: 64T–120T for paper/cardboard/wood. Neon colors: 80T is preferable for better coverage. 3) Print Squeegee: 70-75 Shore, consistent angle, moderate pressure. Always leave plenty of ink in the sieve and flood it back after each pass so that nothing dries out in the design. Remove dried-on fine areas with a squeegee, then briefly clean the motif surface with a damp cloth. 4) Drying Room air: approx. 15 min. Tunnel dryer: max. 50 °C . It dries through water evaporation. Layer thickness and additives affect…